| Micro-controller based
panel which have following specification |
 |
Max no of Stop: - Basic
8 No. Expansion 8 No. Total 32 No. |
|
If Serial Cop and Landing then 60
No. |
|
Safety Signal: - 110V AC. |
|
Push button and call register LED
signal: 12VDC or 24VDC. |
|
Speed: 4 m/sec. |
|
All signals are Opto isolated |
|
All system parameters can be adjusted
by user via buttons and LCD on the card. |
|
Can be used in group operation. |
|
All panels in the group are same and
no extra panel is needed. Only to do
is |
|
setting each panel as A, B and C in
the program menu. |
|
Compatible with VVVF drivers. |
|
Only two cables needed for group communication. |
|
Floor detection is carried out by
counter system. Only 3 magnetic switches
for |
| |
one speed and 4 for two speed systems
including limit switches are used for
|
| |
any number of floors. |
|
An error code with its explanation
is displayed on the LCD at an abnormal |
| |
condition. |
|
At normal condition the lift can be
monitored by messages on the LCD. (Waits
|
| |
for calls, high speed, low speed,
inspection) |
|
Only 15 cables are enough for system
to work by using serial car connection. |
|
Auto Door/ V3F / Manual Selection. |
|
Segment display selection. |
|
No of Stop Selection. |
|
Fault Indication / Record with time
stamp. |
|
Output parameter timing selection |
|
Up/Down/Collective selection |
|
Serial or Parallel Cop Selection. |
|
Universal, Simplex, Duplex and Multiplex
Selection |
|
Function auto/attend, fire, auto fan,
stop, inspection etc |
